If you use sandpaper, use a super, superfine, like a 2,000 grit sandpaper. There are three cables, and they're in different sizes, so don't worry about mixing them. Now, you can lift the whole scanner unit. ET-2720 is easy to take apart and remove the two screws in front. Go to Epson and see if we have spare parts for you. However, if everything doesn't work out, you can always find spare parts by going to and then go to the printer parts. I hope you can find out it's just a dirty cable or a misplaced cable. I'll take it out, and I'll clean the cable first. For a printer very new and this clean, I don't suspect any physical obstruction for the movement path of the scanner.
Thirdly, you might have a bad motherboard or, to be politically correct, he mainboard. If you don't see a white light, that means the bulb burnt out so it cannot scan the little patch, so the sensor will not be able to recognize you moving to the left. The next thing is the lamp might be burnt out. So there's no power to the unit and the scanner cannot move, or you have something physically obstruct the pathway of the scanner and something mechanical. It depends on a couple of sensors. First thing, you may have something physically make the scanner unit not able to move to the left, including you have a dirty cable. The printer doesn't have eyes, so it doesn't know what's going on.
Epson l210 power supply problems Patch#
Now, this problem may be caused by a couple of things.Īt power-on, the printer will try to move the scanner to the left and scan a small patch of white as a signal that everything works okay. You also turn off the printer, and turn it back on, and the failure doesn't go away. You'll find your printer start okay, and at random times, suddenly, you've got this error. The scanner error E-02 and there's a small number underneath, 100016. Today we're going to solve a problem for Epson EcoTank.
0 kommentar(er)
